Quietside QSHC-122 Specifications download pdf (Page 63)

DPW Dip Switch Settings

Depending on the application of the DPW unit it may be necessary to alter the

Dip Switch settings from the standard positions

The unit has 5 Dip Switches located on the Microprocessor

Dip Switch Standard Setting Controls

1 ON Fuel Gas Type

2 OFF Fuel Gas Type

3 OFF Unit Options

4 OFF Forced Minimum Firing rate

5 OFF Forced Maximum Firing rate

Setting for Natural Gas Operation

Dip Switch Setting for NG

1 ON

2 OFF

Setting for LP Gas Operation

Dip Switch Setting for LP

1 OFF

2 ON

Unit Options

Switch Dip Switch #3 to ON

On DSR-100F press the Timers and Anti Freeze buttons simultaneously for 5

seconds. This will allow unit to enter the programming mode

Temperature display can be changed between DegF and DegC by pressing the

Timer button 3 times until Lc is displayed in the top RH corner of the unit display,

and f is displayed in the center of the screen

Press the Up temperature arrow and the f will change to a c

Hit the Power On/Off button to exit and switch Dip Switch #3 to OFF, the unit will

now display in DegC

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 79 80

No comments

Quietside QSHC-122 Specifications Page 63